Roof installation is an exciting process for homeowners to give their houses a new look, but you should be aware of the complete roofing process. Whether it’s a sunroof install process or installing metal roofing on a shed, experts like the FRS roofing team follow all the standard steps. Understanding exactly what a roofer will do for you is helpful as you prepare for a roof replacement. This occurs when a reputable roofing contractor replaces your roof.
What exactly do we do During Roof Installation?
Planning for a new roof replacement? Grab a pen and write down these 11 steps that a roofer exactly does to give your house a fresh look.
1. Selecting the Materials for Your Roof
After deciding on a new roof, you should decide what material you prefer for your house. Whether you need a sunroof installation, roof bar installation, or metal roof, Now, calculated metal roof installation cost does it align with your budget? You will need to make several selections before starting your roof installation procedure. The good news is that a skilled roofing crew like FRS, located in Massachusetts (40 Canal St # 3, Medford, MA 02155, United States), can guide you through every choice that fits your objectives, architectural style, and financial constraints. You can choose from various materials, styles, and colors, including tile, stone-coated steel, asphalt, and polymer roofing shingles. You may anticipate that your roofer will place the order and arrange for the materials to be delivered safely.
2. Organising the Workspace
Material for the new roof should arrive at your house one to two days before the start of the new roofing process. Talk to your contractor about the best time and location for the trash to prevent cars from becoming stuck in the garage or driveway. Your roofer will arrive to start work on the day of your roof replacement. If you have any questions about getting ready, please visit for further guidance.
3. Getting Ready for Your New Roof Installation
Proper precautionary measures are needed during the roofing process. To ensure safety, keep your pet aside in a safe place. Before starting, check that there are no barriers preventing ladders from reaching the roof. The roofing crew has access to the roof, including unlocked gates. Protect any precious artifacts in your garden by taking the necessary precautions.
4. Performing Inspections and Repairs
Some houses need to repair their structures before starting the roofing process. For instance, if there is any damage due to frequent storms, your roofer will likely inspect the sheathing. At this point, any necessary Roof repairs will be made.
5. Tearing Down the Old Roof
The first thing the roofing crew will do for the new roof replacement is remove all your outdated roofing materials. The messiest step in the procedure is this one: examining the roof. After removing the old, damaged roof material, the roofing experts will keenly check the flashing and roof deck (sheathing) to determine their present state. Depending on their existing state, flashing around roof valleys, chimneys, and vents may need to be changed to stop water seepage.
6. Installation of Underlayment
The FRS team will apply the underlayment over the roof deck after replacing the metal drip edge. Various underlayment solutions are available, such as an ice and water barrier, which is particularly effective at the deck’s eaves and valleys. The remainder of the deck will be covered with synthetic underlayment. During the quoting phase, make sure you go over these choices with your contractor.
7. Shingle Installation
The contractor will lay starter shingles along the roof deck’s side and bottom margins to begin the shingle installation procedure. After that, roofing nails secure the staggered rows of asphalt shingles. Ridge and hip shingles are applied to the roof’s hips and Ridge as a final touch in the roof installation process.
8. Vent installation or replacement
If you are at home during your roof replacement, feel free to observe or speak with the crew outdoors. The contractor owner will visit the job site throughout the day.
Depending on your particular roof’s ventilation needs, your contractor will most likely replace or add to any existing ridge vents and/or static vents.
9. Flashing Installation
A metal substance called flashing is placed around windows, joints, chimneys, and other similar locations to prevent water from infiltrating those otherwise weak points. Installing new flashing is a necessary process in roof installation.
10. Closing off the Ridge
In this last step, specialty materials are employed to protect your roof’s Ridge.
11. Clearing Up
After your Installation is complete, an expert FRS roofing crew will dispose of all of the old roofing material securely and mow your lawn to remove any nails or other debris. Your magnificent new roof replacement is complete now. Take a good selfie in front of your new roof and post it on social media.
Reach Us Out for a New Roof and Be Relaxed
When it’s time for a new roof installation, choose a local team with a track record of success and excellent customer service to offer yourself the peace of mind you deserve. If you are located in Newton, Bedford, Wayland or any other part of Massachusetts, we, the expert roofing team at FRS, are here to provide long-lasting performance. We’re honored to have received a 5-star rating on Google. Our goal is to make roof replacement an enjoyable task for you.